User's Manual

I/O Fabric Management 279
Viewing the Health Status of an Individual IOM
The I/O Module Status page (separate from the I/O Modules Status page)
provides an overview of an individual IOM.
To view the health status of an individual IOM:
1
Log in to the CMC Web interface.
2 Expand I/O Modules in the system tree. All of the IOMs (1–6) appear in
the expanded
I/O Modules list.
3 Click the IOM you want to view in the I/O Modules list in the system tree.
4 Click the Status sub-tab. The I/O Modules Status page displays.
Fabric Indicates the type of fabric for the IOM: Gigabit Ethernet, 10GE
XAUI, 10GE KR, 10GE XAUI KR, FC 4 Gbps, FC 8 Gbps, SAS 3
Gbps, SAS 6 Gbps, Infiniband SDR, Infiniband DDR, Infiniband
QDR, PCIe Bypass Generation 1, PCIe Bypass Generation 2.
NOTE: Knowing the fabric types of the IOMs in your chassis is critical in
preventing IOM mismatches within the same group. For information
about I/O fabric, see "I/O Fabric Management" on page 273.
Name Displays the IOM product name.
Power Status Indicates the power status of the IOM: On, Off, or N/A (Absent).
Service Tag Displays the service tag for the IOM. The service tag a unique
identifier provided by Dell for support and maintenance.
Any change in health is logged to both the hardware and CMC log.
For more information, see "Viewing the Event Logs" on page 300.
NOTE: Passthroughs do not have service tags. Only switches have
service tags.
Table 10-1. I/O Modules Health Status Information (continued)
Item Description