User's Manual

268 Using the iKVM Module
The rear panel access does not work. The front panel setting is enabled by the
CMC, and a monitor is currently
connected to the front panel.
Only one connection is allowed at a time.
The front panel connection has
precedence over ACI and the rear panel.
For more information about connection
precedence, see "iKVM Connection
Precedences" on page 246.
The message "User has been disabled as
another appliance is currently tiered"
appears on the monitor connected to the
rear panel.
A network cable is connected to the iKVM
ACI port connector and to a secondary
KVM appliance.
Only one connection is allowed at a time.
The ACI tiering connection has
precedence over the rear panel monitor
connection. The precedence order is front
panel, ACI, and then rear panel.
Table 9-6. Troubleshooting iKVM (continued)
Problem Likely Cause and Solution