User's Manual

Power Management 243
Using the Web Interface
1 Log in to the CMC Web interface.
2 Select I/O Modules . The I/O Modules Status page displays.
3 Click the Power Management tab. The Power Control page displays.
4 Select the operation you want to execute ( reset or power cycle ) from the
drop-down menu beside the IOM in the list.
5 Click Apply . A dialog box appears requesting confirmation.
6 Click OK to perform the power management action (for example, cause
the IOM to power cycle).
Using RACADM
Open a Telnet/SSH text console to the CMC, log in, and type:
racadm chassisaction -m switch-<
n > < action >
where < n > is a number 1-6 and specifies the IOM (a1, a2, b1, b2, c1, c2), and
< action > indicates the operation you want to execute: powercycle or
reset .
Executing Power Control Operations on a Server
NOTE: To perform power management actions, you must have Chassis Control
Administrator privilege.
The CMC enables you to remotely perform several power management
actions, for example, an orderly shutdown, on an individual server in the
chassis.
Using the Web Interface
1 Log in to the CMC Web interface.
2 Expand Servers in the system tree, and then select the server on which you
want to execute a power control operation. The
Server Status page
displays.
3 Click the Power Management tab. The Server Power Management page
displays.