User's Manual

Power Management 223
Viewing the Health Status of the PSUs
The Power Supply Status page displays the status and readings of the PSUs
associated with the chassis. For more information about CMC power
management, see "Power Management" on page 215.
Using the Web Interface
The PSU health status can be viewed in two ways: from the Chassis Graphics
section on the Chassis Status page or the Power Supply Status page. The
Chassis Graphics page provides a graphical overview of all PSUs installed in
the chassis.
To view health status for all PSUs using Chassis Graphics:
1
Log in to the CMC Web interface.
2 The Chassis Status page is displayed. The right section of Chassis
Graphics
depicts the rear view of the chassis and contains the health status
of all PSUs. PSU health status is indicated by the color of the PSU
subgraphic:
• Green - PSU is present, powered on and communicating with the
CMC; there is no indication of an adverse condition.
• Amber - PSU is present, but may or may not be powered on, or may or
may not be communicating with the CMC; an adverse condition may
exist.
• Gray - PSU is present and not powered on. It is not communicating
with the CMC and there is no indication of an adverse condition.
3 Use the cursor to hover over the an individual PSU subgraphic and a
corresponding text hint or screen tip is displayed. The text hint provides
additional information on that PSU.
4 The PSU subgraphic is hyperlinked to the corresponding CMC GUI page
to provide immediate navigation to the
Power Supply Status page for all
PSUs.
To view the health status of the PSUs using Power Supply Status:
1
Log in to the CMC Web interface.
2 Select Power Supplies in the system tree. The Power Supply Status page
displays.