User's Manual

160 Using the CMC Web Interface
Use the following steps to display a FlexAddress status overview for each
server module:
1
Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 93).
2 Click Servers in the system tree. Click the Properties tab, WWN/MAC
sub-tab.
3 The FlexAddress Summary page is displayed. This page allows you to view
the WWN configuration and MAC addresses for all slots in the chassis.
The status page presents the following information:
4 For additional information, click the Help link and review "Using
FlexAddress" on page 169.
Viewing Server FlexAddress Status
FlexAddress status information can also be displayed for each individual
server. The server level information displays a FlexAddress status overview for
that blade.
Fabric Configuration Fabric A, Fabric B, and Fabric C display
the type of the Input/Output fabric
installed.
WWN/MAC Addresses Displays FlexAddress configuration for
each slot in the chassis. Information
displayed includes:
• Slot number and location
• FlexAddress active/not active status
• Fabric type
• Server-assigned and chassis-assigned
WWN/MAC addresses in use
A green check mark indicates the active
address type, either server-assigned or
chassis-assigned.