User's Manual

Using the CMC Web Interface 155
on connection speed. When the internal update process begins, the page
automatically refreshes and the Firmware update timer displays.
Additional items to note:
• Do not use the
Refresh button or navigate to another page during the
file transfer.
• To cancel the process, click
Cancel File Transfer and Update - this
option is available only during file transfer.
• Update status displays in the
Update State field; this field is
automatically updated during the file transfer process. Certain older
browsers do not support these automatic updates. To manually refresh
the
Update State field, click Refresh .
NOTE: The update may take up to one minute for the iKVM.
When the update is complete, iKVM resets and the new firmware is updated
and displayed on the Updatable Components page.
Updating the IOM Infrastructure Device Firmware
By performing this update, the firmware for an infrastructure component of
the IOM device is updated.
1
Log back in to the CMC Web interface.
2 Select Chassis in the system tree.
3 Click the Update tab. The Updatable Components page appears.
4 Click the IOM Infrastructure device name. The Firmware Update page
appears.
5 In the Firmware Image field, enter the path to the firmware image file on
your management station or shared network, or click
Browse to navigate to
the file location.
NOTE: The Firmware Image field does not display for an IOM infrastructure device
(IOMINKF) target because the required image resides on the CMC. The CMC
firmware should be updated first, before updating IOMINF firmware.
6 Click Begin Firmware Update . A dialog box prompts you to confirm the
action.
7 Click Yes to continue. The Firmware Update Progress section provides
firmware update status information. A status indicator displays on the
page while the image file uploads. File transfer time can vary greatly based