Users Guide

QuickDeploy IP Address Assignments For Servers

The following tables show the way that the QuickDeploy IP addresses assigned to the servers based on

the sleds present in the FX2/FX2s Chassis:

• Two full-width sleds in the chassis:

• Four half-width sleds in the chassis:

NOTE: For QuickDeploy to assign IP addresses to the bottom sled, the Reserved QuickDeploy

IPAddresses field must be set to 4 for the bottom sled iDRAC.

• Eight quarter-width sleds in the chassis:

• Four FM120x4 sleds in the chassis:

• Top row contains only quarter-width sleds and bottom row contains only half-width sleds:

• Top row contains only full-width sleds and bottom row contains only half-width sleds:

• Top row contains full-width sleds and bottom row contains only quarter-width sleds:

Modifying iDRAC Network Settings for Individual Server iDRAC

Using this feature, you can configure the iDRAC network configurations settings for each installed server.

The initial values displayed for each of the fields are the current values read from the iDRAC. To use this

feature, you must have an Enterprise License.