Users Guide

Setting Description
settings, and then to apply the server profile
assigned when a new server is inserted in the
chassis.
Set iDRAC Root Password on Server Insertion Select the option to change iDRAC root
password to match the value provided in the
iDRAC Root Password field, when a server is
inserted.
iDRAC Root Password When the Set iDRAC Root Password on Server
Insertion and QuickDeploy Enabled options are
selected, this password value is assigned to a
server's iDRAC root user password when the
server is inserted into a chassis. The password
can have 1 to 20 printable (including white
spaces) characters.
Confirm iDRAC Root Password Allows you to retype the password provided in
the Password field.
Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By
default, this option is cleared.
Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default,
this option is selected.
Enable iDRAC IPMI over LAN Enables or disables the IPMI over LAN channel
for each iDRAC present in the chassis. By default,
this option is selected.
Enable iDRAC IPv4 DHCP Enables or disables DHCP for each iDRAC
present in the chassis. If this option is enabled,
the fields QuickDeploy IP, QuickDeploy Subnet
Mask, and QuickDeploy Gateway are disabled,
and cannot be modified since DHCP is used to
automatically assign these settings for each
iDRAC. To select this option, you must select the
Enable iDRAC IPv4 option. Quick Deploy IP
address option is provided with two values 4 and
2.
Reserved QuickDeploy IP Address Select the number of static IPv4 addresses
reserved for iDRACs in the chassis. The IPv4
addresses starting from Starting iDRAC IPv4
Address (Slot 1) are considered as reserved and
assumed to be unused elsewhere in the same
network. Quick Deploy feature does not work
for servers that are inserted into slots for which
there is no reserved static IPv4 address.
Starting iDRAC IPv4 Address (Slot 1) Specifies the static IP address of iDRAC in the
server, in slot 1 of the enclosure. The IP address
78