Users Guide
Viewing PCIe Slot Properties Using RACADM
You can view a PCIe slot assignment to a server by using the RACADM commands. Some of the
commands are given here. For more information about the RACADM commands, see theDell Chassis
Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide available at
dell.com/support/Manuals.
NOTE: The PCIe card name will be displayed only after the BIOS completes POST in the associated
sSled. Until then, the device name will be displayed as Unknown.
• To view the current assignment of PCIe devices to servers, run the following command:
racadm getpciecfg -a
• To view the properties of PCIe devices by using FQDD, run the following command:
racadm getpciecfg [-c <FQDD>]
For example, to view the properties of PCIe device 1, run the following command.
racadm getpciecfg -c pcie.chassisslot.1
NOTE: The PCIe card will not be powered on if the Mezzanine card is not present in the associated
Sled.
148