Users Guide

Viewing PCIe Slots

The PowerEdge FX2/FX2s chassis optionally contain eight PCIe slots where each PCIe slot is assigned to a

specific Sled. By default, all PCIe slots are mapped. PCIe slots cannot be reassigned or unassigned to the

servers.

PCIe Slot Mapping for PowerEdge FC630

PCIe slot-1 4

PCIe slot-2 4

PCIe slot-3 2

PCIe slot-4 2

PCIe slot-5 3

PCIe slot-6 3

PCIe slot-7 1

PCIe slot-8 1

NOTE: PCIe management is supported only for PowerEdge FX2s and not PowerEdge FX2.

For more information about Managing PCIe slots, see the CMC for Dell PowerEdge FX2/FX2s Online

Help.

NOTE: The Agent free monitoring feature will not be available for the PCIe PERC and Network cards

in the Chassis PCIe slots. Agent-free monitoring is the systems management solution for Dell’s 12th

generation servers. It is completely out-of-band with no dependence on any operating system

agents. Using Agent-free monitoring you can monitor the storage attached to the server (PERCs,

hard disks, enclosures etc.) network devices using iDRAC without installing any agent on the

managed system or management station. For more information on Agent-free monitoring see,

Agent-free inventory and monitoring for storage and network devices in Dell PowerEdge 12G

Servers

whitepaper in Dell TechCenter.

Viewing PCIe Slot Properties Using CMC Web Interface

• To view the information about all the eight PCIe slots, in the left pane, click Chassis Overview → PCIe

Overview. Click the to view all the properties for the required slot.

• To view the information about one PCIe slot, click Chassis Overview → PCIe Slot <number> →

Properties → Status.

147