Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.10 for Dell PowerEdge FX2
131132133134135136137138139140
An Operation Successful message is displayed. The current VLAN settings that are assigned to the
IOMs are displayed in the VLAN Assignment Summary field.
Updating Untagged VLANs for IOMs Using CMC Web
Interface
To update untagged VLANs for IOM(s) using the CMC Web interface:
NOTE: The untagged VLANs cannot be set to a VLAN ID that is already tagged.
1. Go to, I/O Module Overview , and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
2. In the Select I/O Module section, select the required IOMs.
3. In the Specify Port Range section, select the range of fabric ports to be assigned to the selected
IOM(s).
4. Select the Select or Deselect All option to apply the changes to all or no IOMs.
or
Select the check box against the specific slots to select the required IOMs.
5. In the Edit VLANs section, select Update the Untagged VLANs in the drop down list and click Apply.
A warning message is displayed that the configurations of the existing untagged VLAN will be
overwritten with the configurations of the newly assigned untagged VLAN.
6. Click OK to confirm.
The untagged VLANs are updated with the configurations of the newly assigned untagged VLAN.
An Operation Successful message is displayed. The current VLAN settings that are assigned to the
IOMs are displayed in the VLAN Assignment Summary field.
Resetting VLANs for IOMs Using CMC Web Interface
To reset VLANs for IOM(s) to default configurations using the CMC Web interface:
1. Go to I/O Module Overview, and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
2. In the Select I/O Module section, select the required IOMs.
3. In the Edit VLANs section, select Reset VLANs in the drop down list and click Apply.
A warning message is displayed indicating that the configurations of the existing VLANs will be
overwritten with the default configurations.
4. Click OK to confirm.
The VLANs are assigned to the selected IOMs according to the default configurations.
An Operation Successful message is displayed. The current VLAN settings that are assigned to the
IOMs are displayed in the VLAN Assignment Summary field.
138