Reference Guide

• Session information - getssinfo

• Sensor information - getsensorinfo

• Switches information (IO Module) - getioinfo

• Mezzanine card information (Daughter card) - getdcinfo

• All modules information - getmodinfo

• Power budget information - getpbinfo

• KVM information - getkvminfo

• NIC information (CMC module) - getniccfg

• Redundancy information - getredundancymode

• Trace log information - gettracelog

• RAC event log - getraclog

• System event log - getsel

Output The following information is displayed when the racdumpsubcommand is

processed:

• General system/RAC information

• Coredump

• Session information

• Process information

• Firmware build information

Example

racadm racdump

===============================================================================

General System/RAC Information

===============================================================================

CMC Information:

CMC Date/Time = Wed, 28 Nov 2007 11:55:49 PM

CMC Version = X08

Last Firmware Update = Wed Nov 21 21:37:56 2007

Hardware Version = 2

Current IP Address = 10.35.155.160

Current IP Gateway = 10.35.155.1

Current IP Netmask = 255.255.255.0

DHCP Enabled = 1

MAC Address = 00:55:AB:39:10:0F

Current DNS Server 1 = 0.0.0.0

Current DNS Server 2 = 0.0.0.0

DNS Servers from DHCP = 0

DNS CMC Name = cmc-servicetag

Current DNS Domain =

Chassis Information:

System Model = PowerEdgeM1000eControlPanel

System AssetTag = 00000

Service Tag =

Chassis Name = Dell Rack System

Chassis Location = [UNDEFINED]

Power Status = ON

===============================================================================