Reference Guide

Output
Record: 12
Date/Time: 11/20/2011 14:19:34
Source: system
Severity: Ok
Description: C: boot completed.
Example
racadm getsel
getslotname
Description
Displays the name and host name (if available) of all the four slots, or of a
specified slot (indicated by the slot number) in the chassis. Optionally, use this
command to find if the slot name or host name is displayed in the CMC Web
interface, or with the getslotname [-i <slotNum> | -h] command. If the host
name is not available, the static slot name is used.
To use this subcommand, you must have CMC Login User privilege.
Synopsis
• racadm getslotname
• racadm getslotname [-i <slotNum> | -h]
• racadm getslotname -h
Input
• None -
Displays the slot name for all the four slots in the chassis.
• -i < slotNum > - specifies the slot number.
Values: 1 to 4
• -h - Specifies whether to display the slot name or the host name (if
available). 1 displays host names and 0 displays slot names.
Example
• Display all slots names.
racadm getslotname
<Slot #> <Slot Name> <Host name>
1 SLOT-01
2 Webserver01 WXP-8GRB221
3 Webserver3 WXP-319QWEecet5
4 SLOT-04
• Display the name of the third slot.
racadm getslotname -i 3
• Verify if the option (1 is Active) for displaying host names is set.
getsensorinfo
Description
Displays status of chassis sensors.
54