Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.10 for Dell PowerEdge FX2

Server-1 Present OFF OK H23H23Z H23H23Z

Server-2

a

Present OFF OK JD3FRTW JD3FRTWa

Server-2

b

Present OFF OK JD3FRTW JD3FRTWb

Server-2

c

Present OFF OK JD3FRTW JD3FRTWc

Server-2

d

Present OFF OK JD3FRTW JD3FRTWd

getniccfg

Description Displays the current NIC settings.

Synopsis

racadm getniccfg

Input

racadm getniccfg

racadm getniccfg –m <module>

where –m must be one of the following values:

• chassis

: default state if -m is not specified

• server-n

: where n = 1 to 4

• switch-n

: where n = 1 or 2

Example

racadm getniccfg

NIC Enabled = 1

IPv4 Enabled = 1

DHCP Enabled = 1

Static IP Address = 192.168.0.120

Static Subnet Mask = 255.255.255.0

Static Gateway = 192.168.0.1

Current IP Address = 10.36.0.12

Current Subnet Mask = 255.255.254.0

Current Gateway = 10.36.0.1

47