Reference Guide

<Name> <Type> <Presence
>
<Active WWN/
MAC>>
<Partition
Status>>
<Assignment
Type>>
Server-4-A IDRAC-
Controller
Present F8:DB:88:3D:
9F:A7
N/A FlexAddress
10 GbE KR Present F8:DB:88:3D:
9F:A9
Disabled FlexAddress
10 GbE KR/3 Present F8:DB:
88:3D:A2:78
Unknown FlexAddress
10 GbE KR/3 Present F8:DB:
88:3D:A2:7B
N/A FlexAddress
NOTE: 10 GbE KR/3— The value 3 indicates the protocol type.
Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.
racadm getmacaddress -c all
<Name> <Type> <Presence
>
<Active WWN/
MAC>>
<Partition
Status>>
<Assignment
Type>>
Server-1-A IDRAC-
Controller
Present 18:A9:9B:FD:C
4:DF
N/A Factory
Gigabit
Ethernet
Present 00:0A:00:0A:
00:00
Unknown IO-Identity
Server-3-A Gigabit
Ethernet
Present 4:8F:
69:FC:E8:F1
Unknown Factory
Server-4-A 10 GbE KR/3 Present F8:DB:
88:3D:A2:7A
Unknown FlexAddress
FCoE-WWN Present 20:01:F8:DB:
88:3D:A2:7A
Unknown FlexAddress
getmodinfo
Description
Displays configuration and status information for all modules or a specified module
(server, switch, CMC, fan unit, blower, power supply unit, chassis, main-board, IO cable,
and FPC cable) in the chassis.
To use this subcommand, you must have CMC Login User privilege.
NOTE: The service tag field is blank for modules that do not have service tags.
Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
• -m < module > — Specifies the module for which the configuration and status
information is required. The default command (no options) displays information
about all the major components in the chassis.
<module > can be one of the following values:
45