Reference Guide

switch-1 N/A None Not

Present

N/A N/A N/A

switch-2 PE 10

Gigabit KR

Present OK ON Master

getled

Description Displays the LED settings on a module: blinking, not blinking, or unknown

(for empty slots).

To use this subcommand, you must have the Login User privilege.

Synopsis

racadm getled -m <module>

Input CMC only options:

-m < module > — Specifies the module whose LED settings you want to

view.

< module > can be one of the following:

• server-n where n=1 or 4

• switch-n where n=1 or 2

• chassis

• CMC active

Example For CMC:

• racadm getled -m server-4

<module> <LED state> server-4 Blinking

• racadm getled -m chassis

<module> <LED state> server-4 Not blinking

• racadm getled -m server-1

<module> <LED state> server-1 ON

• racadm getled -m server-1

<module> <LED state> server-1 Extension(1)

getmacaddress

Description Displays the MAC/WWN addresses for all modules or for a specified module.

The decoder values in the Type column indicate the protocols of the network

cards.

• 0— Unsupported

• 1— ISCSI

• 2— FCoE-FIP

• 3— iSCSI/FCoE-FIP