Reference Guide

To use this subcommand, you must have CMC Login User privilege.

NOTE: If FlexAddress is not activated on the chassis, the command

displays server-assigned MAC/WWN addresses. If the slot is empty, the

command leaves the server-assigned MAC/WWN addresses blank. If an

external console controls the MAC/WWN addresses, the command

displays an externally managed message.

Synopsis

racadm getflexaddr [-i <slotNum>]

Input -i < slotNum > — Specifies the slot information to be displayed. < slotNum >

must be from 1 to 4.

Example

Display current FlexAddress settings for all the slots and fabrics.

racadm getflexaddr

<Slot#> <Status> <Server Presence>

1a Enabled Present

1b Enabled Present

1c Enabled Present

1d Enabled Not Present

2 Enabled Present

3a Disabled Present

3b Disabled Present

3c Disabled Present

3d Disabled Present

4 Disabled Present

idrac System Disabled

Display the current FlexAddress setting for slot 1.

racadm getflexaddr -i 1

Slot-1 server presence = Present

Slot-1 flexaddress enabled = 1