Reference Guide

<Server#> <Presence> <DC1 Type> <DC1 State> <DC2 Type> <DC2 State>
server-4 Not Present None N/A None N/A
getdcinfo -n
<Server#> <Presence> <DC1 Model Name> <DC2 Model Name>
server-1 Present None None
server-2 Not Present None None
server-3 Not Present None None
server-4 Present None Broadcom M5708t
getsleduplinkstatus
Description
Displays multi-node sled network switch uplink status.
Synopsis
racadm getsleduplinkstatus
Examples
racadm getsleduplinkstatus
Sled No : 2
Port No = 3
A1 Link Status = Up
A2 Link Status = Down
Port No = 4
A1 Link Status = Up
A2 Link Status = Up
Sled No : 3
Port No = 5
A1 Link Status = Up
A2 Link Status = Down
Port No = 4
A1 Link Status = Up
A2 Link Status = Up
getflexaddr
Description Displays enabled or disabled status for the entire chassis. If used with -i, the
command displays MACs/WWN on a per-slot–basis.
The decoder values in the Type column indicate the protocols of the
network cards:
• 0— Unsupported
• 1— ISCSI
• 2— FCoE-FIP
• 3— iSCSI/FCoE-FIP
36