Reference Guide

• racadm feature -r -c ExtendedStorage

Input

• -s — Displays the status of active features.

• -d — Deactivates the feature specified in -c option.

NOTE: When the FlexAddress and FlexAddressPlus features are active,

deactivating one of them results in deactivation of the other feature

also. However, ExtendedStorage is not affected by the deactivation of

FlexAddress or FlexAddresPlus.

• -r — Repair damaged/unformatted ExtendedStorage media.

NOTE: The –r switch requires that the ExtendedStorage feature be

deactivated.

CAUTION: Using the -r switch reformats the SD media in the CMC

cardslot. Any existing ExtendedStorage data will be lost.

• -c — <featurename> must be one of the following:

• flexaddress (with -d)

• flexaddressplus (with -d) ExtendedStorage (with -d or -

featurecard

Description Verifies proper SD card installation and displays the SD card status.

To use this subcommand, you must have the Chassis Configuration

Administrator privilege.

Synopsis

racadm featurecard -s

Input -s — Lists active SD card features and SD card status.

Output

An example of output is given here.

racadm featurecard -s

CMC: The feature card inserted is valid, serial number =

CN0H871T137401112222A00 The feature card contains the

following feature(s):

FlexAddress: bound

FlexAddressPlus: bound

ExtendedStorage: bound

fwupdate

Description

Allows you to update the CMC firmware, chassis infrastructure firmware.

You can:

• Check the firmware update process status.

• Update the firmware from a FTP or a TFTP server by providing an IP

address and optional path.