Reference Guide

• ` (back quotation marks)

• \ (backslash)

For example, use the following for a string that contains the special characters, $, ",',`and \.

For single quotation marks:

• No character escaping is necessary.

• A single quotation mark cannot be used even with a backslash escaped.

NOTE: An empty string may be specified as either "" (using double quotation marks) or '' (using

single quotation mark).

"?"and "?<subcommand>"

Description

Displays all the subcommands you can use with the RACADM command and

a one-line description of each subcommand.

? followed by < subcommand > displays the syntax for the specified

command.

To use this subcommand, you must have the CMC Login User privilege.

You can also use the help and help <subcommand> commands to obtain

the same information.

Synopsis

• racadm ?

• racadm ? <subcommand>

Input NA

Output NA

Example for RACADM ?

The following output example shows only part of the actual output for the racadm ? command.

Descriptions shown in this example may vary slightly from the descriptions in your racadm session.

racadm ?

help -- list racadm subcommand description

help <subcommand> -- display usage summary for a subcommand

? -- list racadm subcommand description

? <

subcommand> -- display usage summary for a subcommand

arp -- display the networking arp table

chassisaction -- execute chassis or switch power-up/down/cycle or

clrraclog -- clear the CMC log

clrsel -- clear the System Event Log (SEL)

config -- modify CMC configuration properties

...

setniccfg -- modify network configuration properties

setractime -- set the time on the CMC

setslotname -- sets the name of the slot in the chassis

setsysinfo -- set the chassis name and chassis location

sslcertview -- display a CA/server certificate in the CMC

sslcsrgen -- generate a certificate CSR from the CMC

testemail -- test CMC e-mail notifications

testfeature -- test CMC feature x