Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.10 for Dell PowerEdge FX2
131132133134135136137138139140
Example
$ racadm getconfig -g cfgIPv6LanNetworking
cfgCurrentIPv6Enabled=1
cfgIPv6AutoConfig=1
cfgIPv6Address=::
cfgIPv6PrefixLength=64
cfgIPv6Gateway=::
cfgIPv6DNSServersFromDHCP6=1
cfgIPv6DNSServer1=::
cfgIPv6DNSServer2=::
If both IPv4 and IPv6 are enabled on the CMC, IPv6 DNS servers take priority. The order of preference for
DNS servers is:
• cfgIPv6DNSServer1
• cfgIPv6DNSServer2
• cfgDNSServer1
• cfgDNSServer2
cfgCurrentLanNetworking (Read Only)
This group displays the current CMC NIC properties.
Use this object with the getconfig subcommand.
To use this object property, you must have the CMC Login User privilege.
Synopsis
racadm getconfig -g cfgCurrentLanNetworking
cfgNicCurrentIpAddress
Description Displays the IP address the CMC is currently using.
Legal Values Valid IPv4 addresses. For example: 192.168.0.20.
cfgNicCurrentNetmask
Description Displays the subnet mask the CMC is currently using.
Legal Values Valid IPv4 addresses. For example: 192.168.0.20.
135