Reference Guide

Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
NOTE: To apply this setting to iDRAC, use the -m option.
The following sections provide information about the objects in the cfgIPv6LanNetworking group.
cfgIPv6Enable (Read or Write)
Description Enables or disables CMC IPv6 stack.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgIPv6AutoConfig (Read/Write)
Description Enables or disables the IPv6 Auto Configuration option.
NOTE: If this value is set to 0, the CMC disables auto configuration and
statically assigns IPv6 addresses. If this value is set to 1, the CMC obtains
address and route information using stateless auto configuration and
DHCPv6.
NOTE: The CMC uses its MAC address for its DUID (DUID-LL) when
communicating with a DHCPv6 server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
cfgIPv6Address
Description Assigns a static IPv6 address to the CMC. This property is used only if
cfgIPv6AutoConfig is set to 0 (false).
Legal Values A string representing a valid IPv6 address. For example,
2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF
Default ::
cfgIPv6PrefixLength (Read/Write)
Description Specifies the prefix length for IPv6 address.
133