User's Manual

Using the CMC Web Interface 89
Configuring Basic CMC Settings
Setting the Chassis Name
You can set the name used to identify the chassis on the network. (The
default name is "Dell Rack System.") For example, an SNMP query on the
chassis name will return the name you configure.
To set the chassis name:
1
Log in to the CMC Web interface. The Component Health page displays.
2 Click the Setup tab. The General Chassis Settings page displays.
3 Type the new name in the Chassis Name field, and then click Apply .
Setting the Date and Time on the CMC
1 Log in to the CMC Web interface. The Component Health page displays.
2 Click the Setup tab. The General Chassis Settings page displays.
3 Click the Date/Time sub-tab. The Date/Time page displays.
4 Set date, time, and time zone settings, and then click Apply .
Monitoring System Health Status
Viewing Chassis and Component Summaries
The CMC provides rollup overviews of the chassis, primary and stand by
CMCs, iKVM, and I/O modules (IOMs). For instructions on viewing chassis
and components summaries, see "Viewing Chassis Summaries" on page 268.
Viewing Chassis and Component Health Status
The Component Health page provides rollup overviews of the chassis,
primary and standby CMCs, iKVM, fans, temperature sensors, and I/O
modules (IOMs).
For instructions on viewing chassis and component health status, see
"Viewing Chassis and Component Health Status" on page 272.