User's Manual

CMC Property Database Group and Object Definitions 377
# cfgChassisDCMaxPowerCapacity
Read only. Indicates the total chassis power budget (in watts) available for
chassis operation.
# cfgChassisDCRedundancyReserve
Read only. Indicates the amount of redundant power (in watts) in reserve
that can be utilized in the event of an AC grid or PSU failure. This value is 0
if the Redundancy Policy is set to 0 (no redundancy).
cfgChassisDCPowerServerAllocation
Read only. Indicates (in watts) the cumulative power allocated to servers.
Default: 7928
If cfgChassisDynamicPSUEngagementEnable is set to 1 (enabled) and the
chassis power consumption exceeds the power warning threshold, then the
performance of lower priority servers is reduced until total power
consumption falls below the threshold.
If cfgChassisDynamicPSUEngagementSet is set to 0 (disabled), servers with
lower priority may be powered off until total power consumption falls below
the threshold.
# cfgChassisInfrastructureDCPowerAllocation
Read only. Indicates the estimated cumulative DC output power
consumption (in watts), determined from a field replaceable unit (FRU) on
the hardware modules in the chassis.
# cfgChassisTotalDCPowerAvailable
Read only. Indicates the amount of power (in watts) available for use by the
chassis.
# cfgChassisStandbyPowerCapacity
Read only. Indicates the amount of power (in watts) available for powering up
any hardware modules that are either added to the chassis or powered up (if
they are already present in the chassis).