User's Manual

RACADM Subcommands 345
Restrictions
The sslcsrgen subcommand can only be executed from a local client and
cannot be used in the serial, Telnet, or SSH interface.
Example
• racadm sslcsrgen -s
CSR generation in progress.
• racadm sslcsrgen -g -f c:\csr\csrtest.txt
The csr was generated successfully.
testemail
NOTE: To use this subcommand, you must have Test Alert User privilege.
Description
Sends a test e-mail from the CMC to a specified destination.
NOTE: This command is valid only if e-mail alerts are enabled on the CMC. For
more information about e-mail alerts, see "Configuring E-mail Alerts" on page 265.
Usage
racadm testemail -i < index >
Option
Table A-39 describes the testemail subcommand options.
Example
racadm testemail -i 1
Test email sent successfully.
Table A-39. testemail Subcommand Options
Option Description
-i <index> Specifies the index of the e-mail alert to test.