User's Manual

334 RACADM Subcommands

NOTE: If the fabric type is determined to be Infiniband, the operation is canceled

and the command returns an error. If the FlexAddress feature is not activated, the

command will return an error.

NOTE: The server must be powered off to change the slot state. All servers must be

powered off to change the fabric state.

Usage

racadm setflexaddr [-i <slot#> <state>]

[-f <fabricName> <state>]

<slot#> = 1 to 16

<fabricName> = A, B, C

<state> = 0 or 1

where 0 is disable and 1 is enable

Options

Table A-29 describes the setflexaddr subcommand options.

Example

• racadm setflexaddr -i 1 0

Slot 1 FlexAddress state set successfully

• racadm setflexaddr -f A 1

Fabric A FlexAddress state set successfully

Table A-29. setflexaddr Subcommand Options

Option Description

-i <slot#>

<state>

Enables/disables FlexAddress for the specified slot.

-f

<state>

Enables/disables FlexAddress for the specified fabric.