User's Manual

RACADM Subcommands 305

Fabric-A ethernet disabled

Fabric-B iSCSI enabled

Fabric-C fiber channel enabled

• racadm getflexaddr -i 1

Slot-1 flexaddress enabled = 1

slot1-A1 00:1A:A0:FF:CE:8C 00:18:8B:FF:D9:BB(active)

00:1A:A0:FF:CE:8D 00:18:8B:FF:D9:BC(active)

slot1-A2 00:1A:A0:FF:CE:8E 00:18:8B:FF:D9:BD(active)

00:1A:A0:FF:CE:8F 00:18:8B:FF:D9:BE(active)

slot1-B1 00:1D:09:71:AF:20 00:18:8B:FF:D9:BF(active)

00:1D:09:71:AF:21 00:18:8B:FF:D9:C0(active)

slot1-B2 00:1D:09:71:AF:22 00:18:8B:FF:D9:C1(active)

00:1D:09:71:AF:23 00:18:8B:FF:D9:C2(active)

slot1-C1 10:00:00:00:C9:63:52:6C 20:01:00:18:8B:FF:D9:C3(active)

slot1-C2 10:00:00:00:C9:63:52:6B 20:02:00:18:8B:FF:D9:C3(active)

getioinfo

NOTE: To use this subcommand, you must have CMC Login User privilege.

Description

Displays general information about the I/O modules on the chassis.

NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet,

Fiber Channel, and Infiniband.

Usage

racadm getioinfo

Example

racadm getioinfo

switch-1 Ethernet Passthrough Gigabit Ethernet Present