User's Manual

RACADM Subcommands 303
switch-2 None OK
switch-3 None OK
switch-4 None OK
switch-5 None OK
switch-6 None OK
<Server#> <DC1 Type> <DC1 State> <DC2 Type> <DC2 State>
server-1 Unsupported Invalid Unsupported Invalid
server-2 None OK None OK
server-3 None OK None OK
server-4 None OK None OK
server-5 None OK None OK
server-6 None OK None OK
server-7 None OK None OK
server-8 None OK None OK
server-9 None OK None OK
server-10 None OK None OK
server-11 None OK None OK
server-12 None OK None OK
server-13 None OK None OK
server-14 None OK None OK
server-15 None OK None OK
server-16 None OK None OK
getflexaddr
NOTE: To use this subcommand, you must have Chassis Configuration
Administrator privilege.
Description
Displays enabled/disabled status for the entire chassis or on a per slot basis. If
used with -i, the command allows a slot to be enabled.
NOTE: If there are no activated features on the chassis, the command will return
an error message. If the slot is empty, the command will return an error message.
Usage
racadm getflexaddr [-i <slot#>]
<slot#> = 1 to 16