User's Manual

298 RACADM Subcommands
TFTP firmware update has been initiated. This
update process may take several minutes to
complete.
Firmware update complete.
• racadm fwupdate -s -m cmc-active
Firmware update in progress.
getassettag
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the asset tag for the chassis.
Usage
racadm getassettag [-m < module >]
Options
Table A-9 describes the getassettag subcommand options.
Example
• racadm getassettag -m chassis
or
racadm getassettag
chassis 78373839–33
Table A-9. getassettag Subcommand Options
Option Description
-m <module> Specifies the module whose asset tag you want to view.
Legal value: chassis
Because there is only one legal value, you can obtain the same
output if you do not include this option.