User's Manual

208 Power Management
Peak System Power
Consumption
Timestamp
Displays the date and time recorded when the peak system
power consumption value occurred over the time period
being recorded. The timestamp is displayed in the format
hh:mm:ss MM/DD/YYYY, where hh is hours (0–24), mm
is minutes (00–60), ss is seconds (00–60), MM is the
month (1–12), DD is the day, 1–31, and YYYY is the year.
Minimum System Power
Consumption
Displays the minimum system level AC power
consumption value (in watts) over the time since the user
last cleared this value. This property allows you to track the
minimum power consumption by the system (chassis and
modules) recorded over a period of time. To clear this
value, click the Configuration sub-tab on the Budget
Status page.
Minimum System Power
Consumption
Timestamp
Displays the date and time recorded when the minimum
system power consumption occurred over the time period
being recorded. The format of the timestamp is the same as
described for Peak System Power Consumption
Timestamp.
Table 8-7. System Power Status
Item Description
Overall Power Health Indicates the health status (OK, Non-Critical, Critical, Non-
Recoverable, Other, Unknown) of the chassis’ power
subsystem.
System Power Status Displays the power status (On, Off, Powering On, Powering
Off) of the chassis.
Redundancy Indicates the power supply redundancy status. Valid values
are:
No — PSUs are not redundant
Yes — full redundancy in effect
Table 8-6. Real-Time Power Statistics (continued)
Item Description