User's Manual

206 Power Management
Using the Web Interface
To view the health status of the PSUs:
1
Log in to the CMC Web interface.
2 Select Power Supplies in the system tree. The Power Supply Status page
displays.
Table 8-5 provides descriptions of the information provided on the Power
Supply Status
page.
Using RACADM
See Viewing Power Budget Status below.
Table 8-5. Power Supply Health Status Information
Item Description
Present Indicates whether the PSU is Present or Absent.
Health OK Indicates that the PSU is present and
communicating with the CMC. In the event of
a communication failure between the CMC
and the fan unit, the CMC cannot obtain or
display health status for the PSU.
Warning Indicates that only Warning alerts have been
issued, and corrective action must be taken
within the time frame set by the administrator.
If corrective actions are not taken within the
administrator-specified time, it could lead to
critical or severe power failures that can affect
the integrity of the chassis.
Severe Indicates at least one Failure alert has been
issued. Failure status indicates a power failure
on the chassis, and corrective action must be
taken immediately.
Name Displays the name of the PSU: PS-n, where n is the power supply
number.
Power Status Indicates the power state of the PSU: Online, Off, Redundant,
Standby, or Slot Empty.
Capacity Displays the power capacity in watts.