User's Manual

Using FlexAddress 153
See the Chassis Management Controller (CMC) Secure Digital (SD) Card
Technical Specification document for SD card installation instructions.
NOTE: The SD card contains a FlexAddress feature. Data contained on the SD card
is encrypted and may not be duplicated or altered in any way as it may inhibit
system function and cause the system to malfunction.
NOTE: Your use of the SD card is limited to one chassis only. If you have multiple
chassis, you must purchase additional SD cards.
Activation of the FlexAddress feature is automatic upon restart of the CMC
with the SD feature card installed; this will cause the feature to bind to the
current chassis. If you have the SD card installed on the redundant CMC
system, activation of the FlexAddress feature will not occur until the
redundant CMC is made active. See the Chassis Management Controller
(CMC) Secure Digital (SD) Card Technical Specification document for
information on how to make a redundant CMC active.
Once the CMC restarts, verify the activation process by using the steps in
"Verifying FlexAddress Activation."
Verifying FlexAddress Activation
To ensure proper activation of FlexAddress, RACADM commands can be
used to verify the SD card installation and a second command to verify
FlexAddress activation.
Use the following RACADM command to verify the SD card installation and
status:
racadm featurecard -s