User's Manual

Using the CMC Web Interface 111
Server Administrator
(continued)
Server Configuration Administrator:
• Set IP address
• Set gateway
• Set subnet mask
• Set first boot device
User Configuration Administrator:
• Set iDRAC root password
•iDRAC reset
Server Control Administrator:
•Power on
•Power off
• Power cycle
• Graceful shutdown
• Server Reboot
Test Alert User
CMC users who have the Test Alert User privilege can send
test alert messages.
Debug Command
Administrator
CMC users who have the Debug Administrator privilege
can execute system diagnostic commands.
Fabric A Administrator
CMC users who have the Fabric A Administrator privilege
can set and configure the Fabric A IOM, which resides in
either slot A1 or slot A2 of the I/O slots.
Fabric B Administrator
CMC users who have the Fabric B Administrator privilege
can set and configure the Fabric B IOM, which resides in
either slot B1 or slot B2 of the I/O slots.
Fabric C Administrator
CMC users who have the Fabric C Administrator privilege
can set and configure the Fabric C IOM, which resides in
either slot C1 or slot C2 of the I/O slots.
Table 5-9. User Types (continued)
Privilege Description