Owner's Manual
file:///T|/htdocs/SOFTWARE/smdrac3/cmc/cmc1.10/en/readme/CMC_1.10_A00_README.txt[10/26/2012 2:29:56 PM]
======================================================================
SUPPORTED WEB BROWSERS
======================================================================
* Microsoft(R) Internet Explorer 6.0 (32-bit) with SP1 for Windows 2000
Server family.
* Microsoft Internet Explorer 6.0 (32-bit) with SP2 for Windows XP and
Windows Server(R) 2003 family.
* Microsoft Internet Explorer 7.0 for Windows Vista(R), Windows XP, and
Windows Server 2003 family.
* Mozilla Firefox 1.5 (32-bit).
* Mozilla Firefox 2.0 (32-bit).
=============================================
FIRMWARE VERSIONS
=============================================
* CMC Firmware Version: 1.10
This is a maintenance release for CMC Firmware Version 1.0.
######################################################################
RELEASE HIGHLIGHTS
######################################################################
Fixes and Enhancements in 1.10
----------------------------------------
* Support for optional upgrade FlexAddress feature.
The FlexAddress feature is an optional upgrade that allows the
chassis to assign WWN/MAC (World Wide Name/Media Access Control)
addresses to Fibre Channel and Ethernet devices. Chassis-assigned
WWN/MAC addresses are globally unique, and specific to a server slot
within a given chassis. This feature allows the chassis to assign a
WWN/MAC address (Chassis Assigned IDs) that stays with a particular
slot in the chassis. If a server is replaced, the FlexAddress for
the slot remains the same for that given server slot. If the server
is inserted into a new slot or chassis, the server-assigned WWN/MAC
is used unless the FlexAddress feature is enabled for the new slot.
If you remove the server, it will revert to the server-assigned
address.
* CMC will block any user attempt to upload a non-Web server
certificate. A user error will be returned.
* If a user has uploaded a non-Web server certificate using CMC
firmware version 1.01, after a firmware install and reboot of 1.10,
the non-Web server certificate will be removed.