Owner's Manual

Using the LCD Panel Interface 367
Critical System Board PFault Fail Safe:
Voltage sensor for System Board,
state asserted was asserted
This event is generated when the
system board voltages are not at
normal levels.
Critical System Board OS Watchdog:
Watchdog sensor for System
Board, timer expired was asserted
The iDRAC watchdog timer
expires and no action is set.
Critical System Board OS Watchdog:
Watchdog sensor for System
Board, reboot was asserted
The iDRAC watchdog detected
that the system has crashed (timer
expired because no response was
received from Host) and the action
is set to reboot.
Critical System Board OS Watchdog:
Watchdog sensor for System
Board, power off was asserted
The iDRAC watchdog detected
that the system has crashed (timer
expired because no response was
received from Host) and the action
is set to power off.
Critical System Board OS Watchdog:
Watchdog sensor for System
Board, power cycle was asserted
The iDRAC watchdog detected
that the system has crashed (timer
expired because no response was
received from Host) and the action
is set to power cycle.
Critical System Board SEL: Event Log
sensor for System Board, log full
was asserted
The SEL device detects that only
one entry can be added to the SEL
before it is full.
Warning ECC Corr Err: Memory sensor,
correctable ECC (<DIMM
Location>) was asserted
Correctable ECC errors reach a
critical rate.
Critical ECC Uncorr Err: Memory sensor,
uncorrectable ECC (<DIMM
Location>) was asserted
An uncorrectable ECC error was
detected.
Critical I/O Channel Chk: Critical Event
sensor, I/O channel check NMI was
asserted
A critical interrupt is generated in
the I/O Channel.
Critical PCI Parity Err: Critical Event
sensor, PCI PERR was asserted
Parity error was detected on the
PCI bus.
Table C-8. Server Status Screen for M600/M605 (continued)
Severity Message Cause