Owner's Manual

310 RACADM Subcommands
setassettag
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the N-byte ASCII asset tag for the chassis.
Usage
racadm setassettag -m chassis < asset tag >
Options
Table A-24 describes the setassettag subcommand options.
Example
Input:
racadm setassettag -m chassis 783839–33
or
racadm setassettag 783839–33
The asset tag was changed successfully.
setled
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the state (blinking or not blinking) of the LED on the specified module.
Table A-24. setassettag Subcommand Options
Option Command
-m <module> Specifies the module whose asset tag you want to set.
Legal value: chassis
NOTE: Because there is only one legal value, you can
obtain the same output if you do not include this option.