Owner's Manual

RACADM Subcommands 309
Example
racadm serveraction -m server-3 powerup
Server power operation successful.
setchassisname
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the name of the chassis in the LCD.
Usage
racadm setchassisname < name >
Example
racadm setchassisname dellchassis-1
The chassis name was set successfully.
Table A-23. serveraction Subcommand Options
Option Description
-m server-n Specifies the server by its slot number (1–16) in the chassis.
For example, server-2.
<action> Specifies the action. <action> may be one of the following:
• powerdown — Powers down the server.
•
powerup — Powers up the server.
•
powercycle — Issues a power-cycle operation on the
server. The -w <
cycleWait > option can be used with
powercycle.
•
graceshutdown — Shuts down the server gracefully.
•
hardreset — Performs a reset (reboot) operation on the
server.
•
powerstatus — Displays current power status (Online,
Off) of the server.