Owner's Manual

140 Using the CMC Web Interface
1 Download the latest iDRAC firmware to your management computer from
support.dell.com .
2 Log in to the Web interface (see "Accessing the CMC Web Interface" on
page 87).
3 Click Chassis in the system tree.
4 Click the Update tab. The Updatable Components page appears. The
server with the recoverable iDRAC is included in the list if it is able to be
recovered from the CMC.
5 Click server- n , where n is the number of the server whose iDRAC you want
to recover.
6 Click Browse , browse to the iDRAC firmware image you downloaded, and
click
Open .
NOTE: The default iDRAC firmware image name is firmimg.imc.
7 Click Begin Firmware Update .
NOTE: It can take up to ten minutes to update the iDRAC firmware. The file transfer
icon spins while the firmware image is transferred to the CMC, but not while the
CMC transfers the image to the iDRAC.
After the firmware image file has been uploaded to the CMC, the iDRAC will
update itself with the image.
Frequently Asked Questions
Table 5-11 lists frequently asked questions and answers.