Owner's Manual

Using the CMC Web Interface 131
Idle Timeout Indicates the number of seconds before an idle Telnet
session is automatically disconnected. A change to the
Timeout setting takes effect at the next login; it does not
affect the current session.
Timeout Range: 60–1920 seconds. To disable the Timeout
feature, enter 0.
Default: 300 seconds
Baud Rate Indicates the data speed on the external serial port on the
CMC.
Configuration options: 9600, 19200, 28800, 38400, 57600,
and 115200 bps.
Default: 115200 bps
Authentication
Disabled
Enables CMC Serial Console login authentication.
Default: Unchecked (disabled)
Escape Key Allows you to specify the Escape key combination that
terminates serial/text console redirection when using the
connect com2 command.
Default: ^\
(Hold <Ctrl> and type a backslash (\) character)
NOTE: The caret character ^ represents the <Ctrl> key.
Configuration options:
• Decimal value (example: 95)
• Hexadecimal value (example: 0x12)
• Octal value (example: 007)
• ASCII value (example: ^a)
ASCII values may be represented using the following
Escape key codes:
• Esc followed by any alphabetic character (a-z, A-Z)
• Esc followed by the following special characters: [ ] \ ^ _
• Maximum Allowed Length: 4
Table 5-6. CMC Serial Console Settings (continued)
Setting Description