Owner's Manual

130 Using the CMC Web Interface
NOTE: In an event of a Web server reset, wait at least one minute for the services
to become available again. A Web server reset usually happens as a result of any of
the following events: the network configuration or network security properties are
changed through the CMC Web user interface or RACADM; the Web Server port
configuration is changed through the Web user interface or RACADM; the CMC is
reset; a new SSL server certificate is uploaded.
NOTE: To modify service settings, you must have Chassis Configuration
Administrator privilege.
To configure CMC services:
1
Log in to the CMC Web interface.
2 Click the Network/Security tab.
3 Click the Services sub-tab. The Services page appears.
4 Configure the following services as required:
• CMC serial console (Table 5-6)
• Web server (Table 5-7)
• SSH (Table 5-8)
• Telnet (Table 5-9)
• Remote RACADM (Table 5-10)
5 Click Apply Changes .
Table 5-6. CMC Serial Console Settings
Setting Description
Enabled Enables Telnet console interface on the CMC.
Default: Unchecked (disabled)
Redirect Enabled Enables the serial/text console redirection to the server
through your Telnet client from the CMC. The CMC
connects to iDRAC, which internally connects to the server.
Configuration options: Checked (enabled), unchecked
(disabled)
Default: Unchecked (disabled)