Messages Reference Guide

Category System Health
SubCategory VLT = Voltage
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message CPU <number> <name> voltage is outside of range. Reseat CPU
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
VLT0302
Message CPU
arg1arg2 voltage is greater than the upper warning threshold.
Arguments
•
arg1 =
number
•
arg2 =
name
Detailed
Description
High voltages may be the result of problem with the voltage regulator or a problem with the
processor. Elevated voltages may result in damage to the processor or other electronic
components in side the system.
Recommended
Response Action
1) Turn system off and remove input power for one minute. Re-apply input power and turn
system on. 2) Make sure the processor is seated correctly. 3) If the issue still persists, contact
technical support. Refer to the product documentation to choose a convenient contact method.
Category System Health
SubCategory VLT = Voltage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
VLT0303
Message CPU
arg1arg2 voltage is greater than the upper critical threshold.
Arguments
•
arg1 =
number
•
arg2 =
name
906