Messages Reference Guide

Severity Severity 3 (Informational)
Trap/EventID 2339
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
SWC4008
Message A firmware or software incompatibility detected between CMC 1 and CMC 2.
Detailed
Description
FlexAddress is not implemented in one of the versions of firmware. Please update the
firmware.
Recommended
Response Action
Check firmware versions. Update CMC 1 and CMC 2 firmware to match.
Category System Health
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID 2338
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
SWC4009
Message A firmware or software incompatibility was corrected between CMC 1 and CMC 2.
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID 2339
LCD Message No LCD message display defined.
785