Messages Reference Guide

ManualsBrandsDell ManualsComputersChassis Management Controller Version 1.0 for PowerEdge VRTX

771

772

773

774

775

776

777

778

779

780

Recommended

Response Action

Make sure the user name is valid. If communication with iDRAC is not successful, reset the

iDRAC. Retry the operation after a few minutes.

Category Audit

SubCategory SWC = Software Config

Severity Severity 3 (Informational)

Trap/EventID FALSE

LCD Message No LCD message display defined.

Initial Default. LC Log

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE

SWC8528

Message Chassis Management Controller is unable to update the iDRAC root password.

Detailed

Description

The Chassis Management Controller is unable to update the IDRAC "root" user password. This

can happen if the communction to the iDRAC from CMC is non-functional or if the password

entered is not valid.

Recommended

Response Action

Make sure the password is valid. If communications with the iDRAC is not functioning, reset

the iDRAC and retry the operation after a few minutes. Run the RACADM command "racadm

ping server-<slot number> " to check the communications. If the communications are not

functional, restart the iDRAC by performing a Virtual Reseat of the server using the RACADM

command "racadm racreset -m server-<slot id>".