Messages Reference Guide

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8524
Message Unable to add
arg1 to Chassis Group because a member already exists with the same
addressing information.
Arguments
•
arg1 =
target
Detailed
Description
A Chassis Group member already exists with the same hostname or IP address information as
the target identified in the message.
Recommended
Response Action
No response action is required.
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8525
Message Unable to add member to Chassis Group. Maximum members supported is
arg1 .
Arguments
•
arg1 =
maximum number of members
Detailed
Description
Unable to add member because the maximum number of Chassis Group members indicated in
the message has been reached.
Recommended
Response Action
Try removing an existing member and retry the operation.
Category Audit
770