Messages Reference Guide

Arguments
•
arg1 =
slot number
Detailed
Description
The active CMC has been removed from the chassis. If standby CMC is present, it will become
active.
Recommended
Response Action
Reinstall the CMC that was removed.
Category Audit
SubCategory RDU = Redundancy
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
RDU8522
Message CMC
arg1 : standby CMC arg2 became active
Arguments
•
arg1 =
slot number
•
arg2 =
slot number
Detailed
Description
The standby CMC identified in the message became the active CMC.
Recommended
Response Action
No response action is required.
Category Audit
SubCategory RDU = Redundancy
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
635