Messages Reference Guide

Detailed
Description
The server cannot be turned on if the chassis enclosure is open.
Recommended
Response Action
The chassis enclosure is open. Retry the operation after closing the enclosure.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PWR8588
Message Chassis Management Controller is unable to turn on server-
arg1 because a chassis
infrastructure firmware update is in progress.
Arguments
•
arg1 =
slot number
Detailed
Description
The server identified in the message cannot be turned on while a chassis infrastructure
firmware update operation is in progress.
Recommended
Response Action
The chassis infrastructure firmware update is in progress. Retry the operation after the
firmware update is complete.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PWR8589
Message The server-
arg1 does not have PCIe Mezzanine card in slot B1.
591