Messages Reference Guide

PWR8535
Message Unable to set Server Based Power Management Mode to disable.
Detailed
Description
Unable to set Server Based Power Management Mode to disable.
Recommended
Response Action
Retry the operation. If the issue persists, contact your service provider.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8536
Message Server Performance Over Power Redundancy is enabled.
Detailed
Description
Server Performance Over Power Redundancy is enabled.
Recommended
Response Action
No response action is required.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8537
Message Server Performance Over Power Redundancy is disabled.
565