Messages Reference Guide

PWR8533
Message Power cap changed from
arg1 W AC to arg2 W AC.
Arguments
•
arg1 =
power value
•
arg2 =
power value
Detailed
Description
Power cap seeting was changed.
Recommended
Response Action
No response action is required.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8534
Message Unable to set Server Based Power Management Mode to enable.
Detailed
Description
Unable to set Server Based Power Management Mode to enable.
Recommended
Response Action
Retry the operation. If the issue persists, contact your service provider.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
564