Messages Reference Guide

Detailed
Description
The power supply is installed correctly but an input source is not connected or is not
functional.
Recommended
Response Action
Verify the input source is attached to the power supply. Verify the input power is within the
operating requirements for the power supply.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PSU0909
Message Power restored on power unit
arg1 .
Arguments
• arg1 = number
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category System Health
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PSU0910
Message Soft power control failure detected on power unit
arg1 .
Arguments
•
arg1 =
number
536