Messages Reference Guide

Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message Shut-down test failed. Power cycle system
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PST0193
Message BIOS POST memory test failed.
Detailed
Description
System BIOS POST memory test failed. This exception occurred early in system power on, thus
the system may not display video. (BIOS POST exception code C1)
Recommended
Response Action
Compare system memory installation to supported system memory configurations. Reduce
system configuration to minimum memory configuration.
Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message BIOS POST memory test failed. Check memory devices
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PST0194
Message Remote access controller configuration failed.
Detailed
Description
System BIOS could not configure the Remote Access controller This exception occurred early
in system power on, thus the system may not display video. (BIOS POST exception code C2)
Recommended
Response Action
Cycle input power and power on the system. If the problem persists, contact technical support.
Refer to the product documentation to choose a convenient contact method.
Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
505